Deda Superbox DCR
Deda Superbox DCR
Rek. pris 1 729
1 407
322 rabatt
Finns i lager
(Bara 2)
- Leverans inom 3-5 arbetsdagar
- Fri frakt
- Trustpilot omdöme 4.7/5
- Enkel returnering
Ställ en fråga om denna produkt
Maila kundserviceFör- & Nackdelar
För- & Nackdelar
- This stem allows you to neatly integrate your cables.
- Aerodynamic shape.
- Also compatible with road bikes, mountain bikes or gravel bikes without internal cabling.
- Suitable for 1 1/8-inch - 1 1/2-inch ballheads only.
Specifikation
Specifikation
Märke
|
Deda |
Vikt
|
175 gram |
Bättre | |
Material
|
Aluminium |
Vinkel
|
6 grader |
Styrlagerdiameter
|
1 1/8 inch |
Diameter
|
31,7 mm |
Beskrivning
Beskrivning
The Deda Superbox DCR stem is a stem that allows you to achieve semi-internal to even full internal cabling on traditional road bike frames with a 46mm upper bearing 1 1/8-inch headset and 56mm lower bearing 1.5-inch headset.
The Deda Superbox DCR stem includes special spacers that provide cable routing for brake and or gear cables. The stem can be used in 4 different ways and fits every cable routing solution on the market: DCR, S-DCR, Direct and External.
Combined with the Deda handlebars with the DCR system (Deda internal cable routing), the stem is the perfect solution for bikes with full internal cable routing. The Superbox stem features a proprietary system that offers two possible mounting solutions for internal cable routing.
Full internal cable routing (DCR) or semi-internal cable routing (S-DCR) through a seal that allows installation, adjustment or service without unnecessary complications for electronic cables and hydraulic disc brake cables. Also suitable for Mountain bikes and Gravelbikes with internal cable routing.
When mounted on traditional road bike frames (external cable routing), the Deda Superbox DCR stem can be installed without the S-DCR seal (pictured) (no. 8).
Bike frame DCR-compatible
DCR-compatible frames require a 1"-1/8 fork steerer tube and the top bearing must be 1.5 inches. In this configuration, you should use the 56 mm top cap (pictured) (no. 12) and the black compression ring from DCR original bearing 45° × 45° or the grey version for 36° × 45° bearing type (pictured) (no. 14). For complete internal cable routing, the bicycle frame and front fork must be compatible. The following features are the mandatory technical characteristics requirement. Find out more about DCR compatibility with your frame on the website www.dedaelementi.com
Front fork
The Deda DCR system requires an opening for the front brake cable located at the fork steerer, this allows the cable to run to the disc brake caliper.
- S- DCR cover
- 10 mm spacer
- 20 mm spacer
- Top cover 46 mm
- Top cover 56 mm
- D-clip
Visa mer
Visa mindre
The Deda Superbox DCR stem includes special spacers that provide cable routing for brake and or gear cables. The stem can be used in 4 different ways and fits every cable routing solution on the market: DCR, S-DCR, Direct and External.
Combined with the Deda handlebars with the DCR system (Deda internal cable routing), the stem is the perfect solution for bikes with full internal cable routing. The Superbox stem features a proprietary system that offers two possible mounting solutions for internal cable routing.
Full internal cable routing (DCR) or semi-internal cable routing (S-DCR) through a seal that allows installation, adjustment or service without unnecessary complications for electronic cables and hydraulic disc brake cables. Also suitable for Mountain bikes and Gravelbikes with internal cable routing.
Kompatibilitet
Traditional bike frameWhen mounted on traditional road bike frames (external cable routing), the Deda Superbox DCR stem can be installed without the S-DCR seal (pictured) (no. 8).
Bike frame DCR-compatible
DCR-compatible frames require a 1"-1/8 fork steerer tube and the top bearing must be 1.5 inches. In this configuration, you should use the 56 mm top cap (pictured) (no. 12) and the black compression ring from DCR original bearing 45° × 45° or the grey version for 36° × 45° bearing type (pictured) (no. 14). For complete internal cable routing, the bicycle frame and front fork must be compatible. The following features are the mandatory technical characteristics requirement. Find out more about DCR compatibility with your frame on the website www.dedaelementi.com
Front fork
The Deda DCR system requires an opening for the front brake cable located at the fork steerer, this allows the cable to run to the disc brake caliper.
Leverans innehåller:
- Deda SUPERBOX stem- S- DCR cover
- 10 mm spacer
- 20 mm spacer
- Top cover 46 mm
- Top cover 56 mm
- D-clip
Montering
CAUTION : mounting the Deda Alanera handlebar, Vinci or Superbox stem on a Colnago C64 Disc & V3RS Disc, Pinarello F & F12, Bottecchia Aerospace and Cervélo Caledonia requires a specific plug spacer (Colnago), compression ring (Pinarello & Bottecchia) or insert ( Cervélo).Relaterad produkt
Relaterad produkt
Jämför ovanstående produkterDeda Superbox DCR | Deda Superzero | |
0 recensioner | 3 recensioner | |
Vikt | 175 gram | 140 gram |
Kvalitet | Bättre | |
Material | Aluminium | Aluminium |
Vinkel | 6 grader | 8 grader |
Styrlagerdiameter | 1 1/8 inch | 1 1/8 inch |
Längd | 90 mm / 100 mm / 110 mm | 90 mm / 100 mm / 110 mm / 120 mm / 130 mm / 140 mm |
1 407 | Från 1 040 | |
Denna produkt | Visa produkt |